Switch Hikvision DS-3E1309P-EI/M - 8 Portas Fast Ethernet PoE, Longo Alcance e Proteção Contra Surtos

O Switch Hikvision DS-3E1309P-EI/M é ideal para redes de segurança e monitoramento que exigem eficiência e confiabilidade. Equipado com 8 portas PoE de 10/100 Mbps e 1 porta Gigabit RJ45, oferece um orçamento de potência total de 60W para conectar e alimentar dispositivos como câmeras IP. Suporta VLAN 802.1Q e oferece funcionalidades avançadas, como PoE Watchdog, que detecta e reinicia automaticamente câmeras que não respondem, garantindo uma rede estável.

Este switch também possui proteção contra surtos de 6kV e transmissão de PoE de longo alcance de até 300 metros, além de suporte para STP/RSTP para prevenir loops na rede e detectar falhas no cabeamento. Ideal para redes de monitoramento e instalações de segurança que exigem alta performance e confiabilidade.

 

• General
• ShellMetal material, fan-free design
• Net Weight0.4 kg (0.9 lb)
• Gross Weight0.9 kg (2.0 lb)
• Dimensions (W × H × D)170.00 mm × 27.60 mm × 93.10 mm (6.69'' × 1.09'' × 3.67'')
• Operating Temperature0 °C to 40 °C (32 °F to 104 °F)
• Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
• Operating Humidity5% to 95% (no condensation)
• Relative Humidity5% to 95% (no condensation)
• Power Supply54VDC, 1.2A
• Installation ModeDesk-Mounted,Wall-Mounted
• Max. Power Consumption65 W
• Power Consumption in Idle5 W
• Surge Protection6 kV

• Network Parameters
• Portos8 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port
• MAC Address Table8 K
• Switching Capacity

  Whole-Device Performance: 5.6 Gbps

  Port Performance: 3.6 Gbps

• Packet Forwarding Rate

  Whole-Device Performance: 4.17 Mpps

  Port Performance: 2.68 Mpps

• Internal Cache4 Mbits

• PoE Power Supply
• PoE StandardIEEE 802.3af,IEEE 802.3at
• PoE Power PinEnd-span: 1/2(-), 3/6(+)
• PoE PortPoE: Ports 1 to 8
• Max. Port Power30 W
• PoE Power Budget60 W

• Software Function
• Long Range

  Ports 1 to 8: up to 300 m.

  Long range performance may vary depend on camera model or cable condition.

• HPP

  Support one-click activation and remote management via Hik-Partner Pro. Functions supported:

  1. Display the port rate.

  2. Display the port bandwidth utilization rate.

  3. Display the PoE power usage.

  4. Display topology information.

  5. Display the alarm status.

  6. Restart ports and devices.

  7. Enable port long-rage mode.

  8. Remotely upgrade the device.

• Port Isolation

  Ports 1 to 8: port isolation mode to improve network security

  Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

• System Maintenance

  Support device management via web.

  Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.

  Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.

  Support management via Hik-Central Pro.

  Support remote management via Hik-Partner Pro.

  Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.

  Supports 802.1ab LLDP for peer device discovery.

  Support port mirroring for fault locating.

• PoE WatchdogPorts 1 to 8: auto detect and restart the cameras that do not respond.
• Loop Prevention

  Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.

  Support 802.1D STP.

  Suppport 802.1w RSTP.

• VLAN

  VLAN is used for network scale planning and network health improvement.

  Support 802.1Q.

  Configurable VLAN ID from 1-4094.

  Support Trunk, Access port mode.

  Support Max. 4094 VLAN.

• Approval
• EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
• SafetyCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)
• ChemistryCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)